News

Tsingtao Toky Instruments Co.,Ltd

Chengkang Road 328, Chengyang District,Qingdao,266108

0086-532-87728956
0086-532-87728957

0086-532-87721537

HOW DO I USE A MOISTURE TESTER FOR HAY IN BALES

DOWNLOAD

You'll need a hay moisture meter that has an extended-length probe that can penetrate to the core of the bale. This way, you can get moisture measurements from the center, where the majority of moisture is likely to be. The exact length of the probe you'll need may vary depending on the size of the bale, but a 10" or 18" prod should suffice for most bales.


moisture meter hay stacks

Another thing to keep in mind is that after hay has been baled, the internal density and stem-to-leaf ratio are often inconsistent throughout the bale. Because of this, it’s necessary to test a bale in several locations and average the readings — taking specific note of the high readings. We also recommend testing the bales in different locations as field conditions could affect the moisture levels.


A firm, uniform contact will yield more accurate results, so the prod should be driven across bale slices.


NOTE: Random spoilage of baled hay can occur due to fluctuating field conditions (i.e. windrow size, soil moisture, density, low spots, and shade). Therefore, it’s also important to check bales at several locations in the field.


The TK100H is a reliable moisture reading tool for on-the-go monitoring. If you’re seeking HOW to do this, using the TK100H is an easy and reliable method.

Online

Products

Home

Top